0Makemake ʻia

SDR Transceiver and Receiver Switch Antenna Sharer TR Switch Box with Gas Discharge Protection 160MHz

4.7

★★★★★

178

$36.99 /$45.13

*Name:
*Email:
*Phone:
*Quantity:
*Content:
Attachment:

Supports JPG, JPEG, PNG, PDF, EXCEL, WORD, RAR, ZIP, 7z formats

$31.99 /$45.13

Kūʻai i kēia manawa Hoʻohui i ka kaʻa

Kāleka hōʻaiʻē

Ua palekana ka uku

Makana manuahi

Makana manuahi me kēlā me kēia kūʻai

Kuleana hoʻouna

Hoʻouna manuahi no nā kauoha ma luna o $9.9

Kuleana hoʻihoʻi

ʻAe ʻia nā mea hoʻihoʻi i loko o 40 lā mai ka lā loaʻa. ʻAʻole hiki ke hoʻihoʻi i nā mea i hoʻohui ʻia. ʻAʻole hiki ke hoʻihoʻi i nā mea i kūʻai ʻia me ka kāleka makana.

Makana Manuahi

Aloha mai i Roymall, kāu pūnaewele kūʻai makana maikaʻi. Mahalo nui mākou i kāu kākoʻo, a hāʻawi mākou i makana manuahi me kēlā me kēia kūʻai. Mākaukau e ʻimi i kā mākou hōʻiliʻili? E nānā i kā mākou koho, kau i kāu kauoha, a e kali no kāu makana manuahi me kāu kūʻai.

Kuleana Hoʻouna

Hoʻoponopono mākou i nā kauoha i loko o 2 lā.ʻO ka manawa hoʻouna maʻamau he 5-7 lā hana.Hiki ke ʻokoʻa ka manawa hoʻouna ma muli o ke kahua.

1. Kuleana Hoʻihoʻi

ʻAe mākou i nā mea i kūʻai ʻia mai roymall.com wale nō. ʻAʻole hiki ke hoʻihoʻi i nā makana manuahi. Pono e hoʻohana ʻole ʻia ka mea a i ʻole i loko o ka pūʻolo kumu.Hoʻoponopono mākou i nā hoʻihoʻi i loko o 3-5 lā hana ma hope o ka loaʻa.ʻAʻole hiki ke hoʻihoʻi i nā mea i hoʻohui ʻia.E kelepona iā mākou: service@roymall.com a i ʻole Whatsapp: +8619359849471

2.Kuleana Uku

E loaʻa iā ʻoe ka uku piha ma hope o ka loaʻa a me ka nānā ʻana. ʻAʻole hiki ke hoʻihoʻi i nā uku hoʻouna.E kelepona iā mākou: service@roymall.com a i ʻole Whatsapp: +8619359849471

Specification:

Impedance: 50u03a9

Frequency range: DC -160MHz

Maximum TX power: 100W

RF sense threshold:<10mW (1.8MHz-30MHz tested)

ON time: < 20ms / Release time: < 190ms

Insertion loss: < 0.3dB @ 144MHz (0.2dB typical)

RX isolation: > 38dB @ 144MHz (40dB typical)

Gas discharge protection

Power supply: 13.8V DC 200mA

Weight: 430g

Size: 126*119*52MM

>>>Manual: Click here to open<<<

How to use one antenna at the same time for the radio and SDR:

1. This sharer is a shared antenna between the radio and the SDR. After receiving the goods, open the box, remove the "jumper" in the middle, and change it to an automatic control state, that is: when the radio is transmitting, the SDR receiving channel is automatically closed, and the radio When not transmitting, the radio receives the signal together with the SDR.

2. The jacks in front of the panel do not need to be wired, and the distributed PTT line does not need to be connected.

3. The rear jacks correspond to the power supply (VDC) interface, the radio (RADIO) interface, the SDR interface, and the antenna (ANTENNA) interface, respectively, and connect to the feeder according to each interface.

4. It is recommended to use the feeder with good shielding performance and cover it with a magnetic ring.

5. It is recommended that the sharer and the radio shell be grounded, because the radio may interfere with the SDR when transmitting.

6. After removing the jumper in the box, it is normal that the TRXlight on the panel is always on red; when the radio is not transmitting, the SDR on the panel is green and it is in normal working state; when the radio is transmitting, the SDR light on the panel will be off, and the SSB will follow the idea of communication. It is normal for the sound to change, the indicator light to flash and the relay to make a sound.

Package included:

1 x Host

1 x Power cord

1 x 3.60cm SMA to SMA connecting line

1 x PTT control line

Kūʻai me Paypal